Skip to content
Brown standing seam metal roof on a hillside home, installed by HM Metals

Metal roofing in Newark, Ohio.

Standing seam and exposed fastener metal roofing for Newark homes, barns, garages and shops. Based in Saint Louisville, we install domestically produced steel with roofing products made right here in Central Ohio.

An HM Metals metal roof, Central Ohio

Aerial view of the Heisey Museum in Newark, Ohio, showing the standing seam metal roof by HM Metals
Overhead detail of the Heisey Museum standing seam metal roof in Newark, Ohio
Heisey Museum exterior and standing seam metal roof completed by HM Metals in Newark, Ohio
Exposed fastener
28 ga
Standing seam
26 ga
Steel
Domestic
Produced panels
Central Ohio

The two systems

Same steel.
Different personalities.

Neither is "better" across the board. The right one depends on the building, the look you want and the budget you are working with.

The economical workhorse

Exposed Fastener

28
Gauge

Ribbed steel panels fastened through the face with gasketed screws. It is the classic Ohio look on farmhouses, barns, garages and shops, and it covers a lot of roof for the budget.

Fasteners
Visible, driven through the panel face
Gauge
28 gauge steel
Look
Ribbed, agricultural to traditional
Also used as
Siding on garages and post-frame buildings
Upkeep
Worth checking fasteners over the years

The clean, refined line

Standing Seam

26
Gauge

Panels joined at raised vertical seams with the fasteners concealed beneath. Fewer exposed penetrations and crisp shadow lines give homes a tailored, architectural finish.

Fasteners
Concealed under the raised seam
Gauge
26 gauge steel
Look
Smooth flats, sharp vertical seams
Best on
Homes where the roof is part of the design
Upkeep
Minimal, no face fasteners to revisit

Metal over shingles. An option worth comparing.

On suitable roofs, HM Metals installs exposed-fastener or standing seam metal over one layer of existing shingles.

We never install new shingles over old shingles. Our shingle replacements include tear-off and disposal. A qualifying metal layover avoids that work, which can make our exposed-fastener metal roofing competitively priced with a shingle replacement.

Standing seam can also be installed over one suitable layer of shingles, although its pricing differs from exposed-fastener metal.

We offer two installation methods: over furring strips or over an appropriate synthetic underlayment. Each has its advantages. We inspect your roof and recommend the method that fits the roof condition, selected panel system, and your home.

Not every roof qualifies. We check the existing layers, roof and decking condition, manufacturer requirements, and applicable local requirements before recommending a layover.

Request a roof inspection

Choosing

Which one fits your roof?

A quick gut-check before we come out. Roof pitch, layout and the existing structure all factor in, so we confirm the right system on site.

  1. 01

    Lean exposed fastener if…

    You are roofing a barn, garage, shop or a home where value per square foot matters most, or you want roof and siding to match in one profile.

  2. 02

    Lean standing seam if…

    The roof is a visible part of your home's design, you prefer no exposed screws, and you want the cleanest long lines we offer.

  3. 03

    Either way, ask about…

    Trim, ridge and valley details, gutters, and how the panel color pairs with your siding and stone. These choices shape the finished look as much as the panel does.

  4. 04

    Not sure? Good.

    That is what the conversation is for. Call the office and we will walk through both with you, honestly, including when shingles might suit you better.

Why steel

What a metal roof
brings home.

General strengths of steel roofing. Actual performance depends on the system, the install and your building.

Longevity

Steel is built for the long haul, which is why so many Ohio barns still wear their original panels.

Weather protection

Interlocking steel panels shed rain and snow well and stand up to the wind and temperature swings of Ohio seasons.

Low upkeep

No granules to lose and no curling tabs. Periodic look-overs, especially after big storms, keep it in shape.

Made close by

Domestically produced steel and Central Ohio-made roofing products. Local material, local crew.

Color & finish

Pick a color with the panel in mind.

Our panels come from Metal Exteriors. Colors, textures and prints vary by panel profile, so a shade you love on one system may not be offered on the other. Browse freely, then confirm availability for your specific panel with our team before you decide.

Brown standing seam metal roof on a hillside home, installed by HM Metals

Straight answers

Want a ballpark first? Try the instant roof tool.

Instant roof quote (opens new tab) (opens in a new tab)
Is metal only for barns?
No. Standing seam in particular is a popular choice for homes, and exposed fastener panels look sharp on farmhouses and garages too.
Will my roof pitch work?
Each panel system has its own requirements, and every roof is different. We check pitch and layout during the on-site visit before recommending a system.
How long will it last?
Steel roofing is known for long service life, but we do not quote blanket numbers. Product warranties vary by manufacturer and finish; ask us for the specific terms on the panel you choose.
Can I see every color on both systems?
Not always. Availability depends on panel and profile. Start at Color Choices, then confirm with us.

Serving Newark & Licking County

Planning a metal roof in Newark, Ohio

Replacing your roof starts with choosing a system that fits the building—not just a color. HM Metals serves Newark homeowners and property owners from our office in nearby Saint Louisville, with standing seam and exposed fastener options for homes, garages, barns and shops.

Compare the panel systems

Discuss roof pitch, appearance and how the building is used. We install 26-gauge standing seam and 28-gauge exposed fastener panels; the right choice depends on your roof and priorities.

Check the existing roof

Decking condition, flashing, valleys and penetrations affect the scope. Whether an existing roof can remain requires an inspection and confirmation of applicable local requirements.

Choose the finish and details

Compare Metal Exteriors colors and physical samples with your siding and trim. Confirm panel-specific finish availability, warranty terms and the full installation scope with your quote.

Visit HM Metals at 8291 Mt Vernon Rd, Saint Louisville, OH 43071. Call 740-745-1155, Monday–Friday, 8am–5pm. Serving Newark, Heath, Granville, Utica, Saint Louisville, Pataskala, Hebron, Hanover, Thornville and Buckeye Lake.

Ready to talk steel?

Tell us about the building and the look you want. We will help you choose a system and a color, then put a real price on it.